Tungsten carbide parts, made to your drawing
Seal rings, bushings, nozzles, valve seats, ground rods, mining inserts and drawing dies — made to order in China. Send a drawing or a part number; we come back with grade options and a quotation.
Our products
Wear Parts & Components
Custom tungsten carbide seal rings, bushings, sleeves, nozzles, valve seats and wear liners, made to your drawing for pumps, valves and flow equipment.
Seal Rings & Seal FacesCustom tungsten carbide seal rings and mechanical seal faces for pumps, mixers and compressors. Cobalt- or nickel-bonded grades, lapped to your flatness spec.
Bushings & SleevesTungsten carbide bushings, shaft sleeves and bearings for pumps, downhole tools and slurry equipment, ground to your drawing.
NozzlesTungsten carbide nozzles for spraying, sandblasting and PDC drill bits, made to your drawing or matched to an existing part.
Valve Seats, Balls & TrimTungsten carbide valve balls and seats, choke beans, stems and trim components for oil and gas, pumps and severe-service valves.
Wear Plates, Strips & LinersTungsten carbide wear plates, strips, tiles and liners for chutes, mixers, cutting and guiding in abrasive processes.- Not in the list?Most of what we supply is made to order. Send a drawing, a sample photo or a part number and we come back with a grade and a quotation.Send your drawing →
Rods, Plates & Blanks
Solid and coolant-hole tungsten carbide rods, ground or unground, plus plates, strips and preformed blanks for tool makers and machine shops.
Solid Carbide RodsSolid tungsten carbide rods, h6 ground or unground, for end mills, drills, reamers and punches. Grade options for steel, stainless, cast iron and non-ferrous machining.
Rods with Coolant HolesTungsten carbide rods with one or two straight or helical coolant holes for drills and through-coolant cutting tools.
Plates, Strips & PreformsTungsten carbide plates, flat strips and near-net preformed blanks for cutting tools, knives, dies and wear parts.
Mining & Construction
Tungsten carbide button inserts for DTH and top-hammer bits and tips for picks and cutting teeth used in mining, quarrying, tunneling and road work.
Button InsertsTungsten carbide button inserts — spherical, ballistic, conical and chisel — for DTH hammers, top-hammer bits and roller cones.
Pick & Cutting TipsTungsten carbide tips for conical picks, road milling bits, trencher and auger teeth used in mining, tunneling and road construction.- Not in the list?Most of what we supply is made to order. Send a drawing, a sample photo or a part number and we come back with a grade and a quotation.Send your drawing →
Dies & Tooling Blanks
Tungsten carbide wire drawing die nibs, cold heading die blanks and punch and die blanks for wire, fastener and stamping production.
Wire Drawing Die NibsTungsten carbide wire drawing die nibs and cased dies for steel, copper and aluminium wire, bar and tube drawing.
Cold Heading & Extrusion DiesTungsten carbide die blanks and inserts for cold heading, cold forging and extrusion of bolts, screws, rivets and nuts.
Punch & Stamping Die BlanksTungsten carbide punch blanks, round die button blanks and blocks for stamping and progressive dies, supplied as-sintered or ground, ready for grinding or wire EDM.
Carbide BlocksSintered tungsten carbide blocks, 100 × 100 to 300 × 300 mm and up to 80 mm thick, for punches, die plates and progressive die inserts.
Why buyers work with us
- Engineering-first quotingTell us the application, the operating conditions and the drawing. We recommend a grade for the job instead of a catalogue number.
- Custom and standardOne-off replacement parts to repeat production runs; ground rods and blanks in standard formats.
- Straight answersGrade data, tolerances and lead times are confirmed in writing for your specific part — never copied from a generic table.
How to get a quotation
- Send your drawing (PDF, DWG, DXF, STEP or IGES) or describe the part.
- We confirm the grade, tolerances and finish with you.
- You receive a written quotation with lead time.
Get a quotation
Send your drawing — we reply to every request within one business day.